Cone Crusher Run No Load Test and Load Test Run Introduction
- Submitted by: oppo11
- Views: 357
- Category: English: Plays
- Date Submitted: 06/24/2014 02:04 AM
- Pages: 2
- Report this Essay
As for the trial run itself, there are two kinds of trial run—the empty-load one and the on-load one. And the following part will introduce these two kinds of trail run one by one to give readers a specific and better understanding. During this process, one should be careful and pay special attention to the following things:
1. Check the switch every time one operation is going to be performed.
2. Examine the china systems to make sure whether they are installed correctly.
3. Keep an eye on the gear if noises are emerging.
4. Make sure the rotating speed of the cone will never exceed 0.25r/s.
5. Check the lubrication system to make sure whether it is working normally.
The other one is the so-called on-load trial run of cone crusher which is completed in the crushing chamber. And this one is carried out after the above empty-load is finished. During this process, one should be careful and pay special attention to the following things:
1. Check whether there is certain amount of ores in the chamber for the trial run.
2. Make sure the ores are increased gradually and placed averagely in the chamber.
3. Check the ore discharging to make sure it is normal.
4. Keep an eye on the whole process if noises are emerging.
5. Check the hydraulic system to make sure it is working normally.
6. Make sure the oil pressure can only range from 0.08MPa to 0.15MPa.
7. Check the wear-out parts to make sure they are intact.
8. Check the electric equipment to make sure it is working normally.
Now, the whole trial run has been finished smoothly for further use.
Fote Machinery lays much emphasis on the machine quality and service for clients. We provides wheel sand washer, stone crusher line with good quality, and we believe that quality is the best way to develop market. Thank you!
crawler-type mobile cone crusher: http://www.ftm-ore-beneficiation.com/pro/crawler_type_mobile_cone_crusher.html
1. Check the switch every time one operation is going to be performed.
2. Examine the china systems to make sure whether they are installed correctly.
3. Keep an eye on the gear if noises are emerging.
4. Make sure the rotating speed of the cone will never exceed 0.25r/s.
5. Check the lubrication system to make sure whether it is working normally.
The other one is the so-called on-load trial run of cone crusher which is completed in the crushing chamber. And this one is carried out after the above empty-load is finished. During this process, one should be careful and pay special attention to the following things:
1. Check whether there is certain amount of ores in the chamber for the trial run.
2. Make sure the ores are increased gradually and placed averagely in the chamber.
3. Check the ore discharging to make sure it is normal.
4. Keep an eye on the whole process if noises are emerging.
5. Check the hydraulic system to make sure it is working normally.
6. Make sure the oil pressure can only range from 0.08MPa to 0.15MPa.
7. Check the wear-out parts to make sure they are intact.
8. Check the electric equipment to make sure it is working normally.
Now, the whole trial run has been finished smoothly for further use.
Fote Machinery lays much emphasis on the machine quality and service for clients. We provides wheel sand washer, stone crusher line with good quality, and we believe that quality is the best way to develop market. Thank you!
crawler-type mobile cone crusher: http://www.ftm-ore-beneficiation.com/pro/crawler_type_mobile_cone_crusher.html