Roll Crusher Plays an Important Role in Crushing Work
- Submitted by: sophie01
- Views: 231
- Category: Other
- Date Submitted: 09/23/2014 11:41 PM
- Pages: 2
- Report this Essay
The crushing work is one important step of the modern industrial mining material in the processing of ore procession. Coal mining is the widest industry in the crushing industry, all of the mining ore and raw material must be crushed in order to enter into the second step. With the developing of automation and mechanism of coal exploration and the appearing of the accurate craftsmanship, there must be higher requirement on the crushing technology and the crushing craftsmanship.
According to the specification, the roller crusher can divided into roll crusher, four roll crusher, and tooth roll crusher. The regulation of the discharging size: the adjust device with adjustable bolt is install between the two rollers. When we pull up the wedge, the space between the rollers will enlarge and the discharging size is increasing. To the contrary, the discharging size will decrease.
The toothed roller crusher is used to do medium and fine crushing of hard and medium hard ores and stones in many industries. Our toothed roll crusher’s electromotor is connected with the reducer with Limit type hydraulic coupler to prevent dynamic overload, so that the sensor is safe and reliable, thus making it widely used all over the world.
Double Roll Crusher has two grinding roller, and the rolling surface is divided into wolf teeth, ring gear straight teeth, large plate teeth, etc., which is suitable for feeding particle size less than 1000mm, refined grain size is 10-200mm. It is used in thermal power plants, coking plant to crush coal; the coal mines to break chunks of raw coal: iron and steel industry fragmentation coke; crushing petroleum coke, coal chemical industry; electronics industry fragmentation silica: carbon industry to break carbon block: solar industry to break waste glass tube: concrete industry to break quicklime and asphalt.
Hongxing new efficient tooth roll crusher grades mineral aggregate by shear principle, compared with similar products at home and abroad, low...
According to the specification, the roller crusher can divided into roll crusher, four roll crusher, and tooth roll crusher. The regulation of the discharging size: the adjust device with adjustable bolt is install between the two rollers. When we pull up the wedge, the space between the rollers will enlarge and the discharging size is increasing. To the contrary, the discharging size will decrease.
The toothed roller crusher is used to do medium and fine crushing of hard and medium hard ores and stones in many industries. Our toothed roll crusher’s electromotor is connected with the reducer with Limit type hydraulic coupler to prevent dynamic overload, so that the sensor is safe and reliable, thus making it widely used all over the world.
Double Roll Crusher has two grinding roller, and the rolling surface is divided into wolf teeth, ring gear straight teeth, large plate teeth, etc., which is suitable for feeding particle size less than 1000mm, refined grain size is 10-200mm. It is used in thermal power plants, coking plant to crush coal; the coal mines to break chunks of raw coal: iron and steel industry fragmentation coke; crushing petroleum coke, coal chemical industry; electronics industry fragmentation silica: carbon industry to break carbon block: solar industry to break waste glass tube: concrete industry to break quicklime and asphalt.
Hongxing new efficient tooth roll crusher grades mineral aggregate by shear principle, compared with similar products at home and abroad, low...