Slag Drying Equipment Has Amazing Handling Capacity

Slag drying machine is widely used in industry to dryer slag, sand, coal slime, sludge etc. Materials are sent into the upper end by conveyor or elevator. During moving slowly to the lower end, materials absorb lots of heat and release moisture. Water gets vapourized. The wet and hot air is librated into atmosphere through dust catcher. In the end, dry materials are collected at the outlet. And do you care the capacity of slag drying machine? If you have not ever heard of it, today our expert of Fote will talk something about it. I think you can read this article with your a little time.The working process of granulating slag dryer machine is as follows: wet material to be dried is sent into the hopper by the belt conveyor or bucket elevator and sent into feed end through feeding pipe of feeder hopper. The slope angle of the feeding pipe should be larger than the natural inclination of the materials in order to make the materials smoothly flow into the dryer. The dryer cylinder is a rotating cylinder with slight incline to the horizontal line. The materials are sent from the higher end and the heat-carrying agents are sent from the lower end to be countercurrent contact with the materials. Some heat-carrying agents and materials flow altogether into the end of the barrel with the gravity effect as the rotation of the cylinder. In the process of moving forwardness in the barrel, the wet materials are directly or indirectly gained the heat of the heat-carrying agent and be dried, then the discharge end discharges finished products through belt conveyor or screw conveyor. In order to achieve the best drying effect, the slag dryer adopts the downstream drying method in design, namely the material and the heat source enter the machine from the same side, lowing the temperature of the discharging area and getting a high heat efficiency. Slag drying machine has a large handling capacity, strong resistance to overload ability, less fuel consumption, so it candirectly...