The Smooth Work and Main Features of Cone Crusher

Cone crusher is suitable for breaking all kinds of ores and rocks whose compressive strength is not more than 250MPa. It adopts to break hard and medium hard materials in the mine, metallurgy, building, chemical engineering. Cone crusher is most suitable for intermediate crushing and fine crushing of medium and small resource depots. The cone crusher uses the construction of lower jaw hanging shaft. The production is very high, toothed plate has long life, energy consumption is low and the strength of products is uniformity. With the development of society and technology, the cone crusher will replace old-fashioned crusher gradually.Cone crusher’s crushing cavity depth is large. Its continuous work can bring high production capacity and low power consumption compared with jaw crusher. It has the same feed mouth width of jaw crusher, but its production capacity is twice more than the jaw crusher.Cone crusher’s work is smooth. Its vibration is lighter and the basic weight of machinery and equipment is smaller. The basis weight of the cone crusher is usually two to three times of the weight of the common machinery and equipment, while the basis weight of the jaw crusher is 5 to 10 times the weight of the machine itself.The Features of Cone Crusher1. adjust the openingIt uses high-pressure resistant displacement sensor. And the place of adjusting the throat is in the operation room. As long as a button, there is show on the operating table. Then, you can see the size of throat needed to adjust. It is very convenient and accurate.2. reliable sealCone crusher uses the labyrinth seal, taking the place of past-used water seal. It makes dust not into the machinery in order to keep the clearness of drawing, extend the working life of sliding bearing and thrust ball bearing and make reliable operation.3. easy to changeThe speed of pass-used crusher is low, while the new construction of cone crusher changes the broken walls very quickly. Because card pins are fixed on the...