The briquette machine can recycling agriculture waste or biomass waste naturally. Nowadays biomass is used instead of fossil fuels so it can reduce the carbon dioxide in the atmosphere. All the type of agro forestry waste is fed into briquetting press machine under extreme pressure to convert into bio fuel which is Eco friendly and used in many industries for their different purposes. This process is known as binder less technology because it does not polluting the atmosphere when it burns. But do you know the static pressure ball press machine? And what should we care for this tpe ball press machine?1.In order to ensure the normal operation of the machine, the material into the equipment before the feed motor, its supply can adjust can be used.2.Before and behind the static pressure ball machine related machines should be aware of the chain start and stop of the program.3.No matter what kind of charging method, a solid iron removal equipment must be installed in the front feeding pattern, otherwise, the roller compression will be damaged, so may be the whole machine.4.After the machine starts to run normally, regularly check the connection parts firm.5.Removal and replacement when bearing, and adjust the bearing radial clearance and clearance should comply with the standards.6.Fixed bearing and sliding bearing lubrication points should add oil on time, and 80% of grease should be kept in the chamber.When add oil to drive the support, it is necessary, to ensure that the grease can be squeezed out from the shaft end pressure device, used to prevent dust from going on the purpose of the damaged bearings.7.Use a month later, the hydraulic oil pump and oil filter, should be clean.When the effective service life of three to six months, cleaning and replacement of new oil tank.In addition, the hydraulic pressure station should not be lower than 5 ℃, environment temperature in winter.And we also have other mining machines, such as China mobile crushers, ball mill...